1000W 26a E-Bike Motor Controller

PACKAGE INCLUDES

• 1 x DC Electric Bicycle Motor Controller (for SW900 LCD) - Speed Controller

KEY FEATURES

• Voltage: DC 36/48V (works with 52V battery as well)
• Current: 26 +/-1A
• Silent Pure Sinewave controller
• Pedal Assistance Power (PAS)/Speed Control
• Compatible to be used with SW900 display
• Suitable for both throttle and PAS when paired with SW900 display
• Swap between two power modes 250W or 1000W
• Smart dual mode controller which means that even if your hall sensors are damaged the motor can still operate in square wave (and slightly noisier) mode

SPECIFICATIONS

• Mass: 450g
• Geometry: 180mm x 82mm x 40mm

CONNECTORS - DESCRIPTION

ID	Wire Colour	Description	Connect to
1	Blue / Green / Yellow (thick)	Phase Wires	Motor
2	Red/black 2 No.	Brake cut-off	E-Brakes
3	Red/black (thick)	Battery neg. (black) pos. (red)	Battery
4	Blue	Road Legal switch	To each other
5	Red/black/yellow/green/blue	Hall sensor	Motor
6	Red/black/green (or white)	Throttle	Throttle
7	Red/white/black	PAS	PAS sensor
8	Red/blue/black/green/yellow	Display	SW900 LCD
9	Red/black	LED light	LED light

NOTE

• This controller requires a 36V or 48V battery (52V works as well) (Lithium-ion recommended) with a minimum continuous output of 30 amperage. Please kindly check your battery and battery BMS specifications for suitability.
• The controller can be swapped between the full 1000W or 250W power mode by connecting the single blue wire(s) together. Please check your local guidelines and keep the road legal switch (blue wires) connected on public roads.
• Please feel free to contact us before purchasing this controller to check the compatibility to your electric bike if unsure.