3000W 60a, 5000W 80a E-Bike Motor Speed Controller

PACKAGE INCLUDES

• 1 x DC Electric Bicycle Motor Controller (for SW900 LCD or UKC1 LCD)

KEY FEATURES

• Voltage: DC 48/72V (suits 48V to 72V)
• Current: 60 +/- 1A or select 80 +/- 1A option
• Pedal Assistance Power (PAS)/Speed Control functionality
• Compatible to be used with SW900 display (black and white or colour display) or UKC1 display (please check connector matches before purchasing)
• Suitable for both throttle and PAS when paired with display
• Swap between two power modes 250W or 3000W/5000W
• Choose: Pure Sinewave controller (less noise than SQ wave yet programmed for plenty of torque) or Squarewave controller (more noise, slightly more torque)
  
• If purchasing the Sinewave option then, this controller can work even when your Hall Sensors are damaged i.e. using the three thicker motor (phase) wires only

SPECIFICATIONS

• Mass: 650g
• Geometry: 210mm x 114mm x 53mm

CONNECTORS - DESCRIPTION

ID	Wire Colour	Description	Connect to
1	Blue / Green / Yellow (thick)	Phase Wires	Motor
2	Red/black 2 No.	Brake cut-off	E-Brakes
3	Red/black (thick)	XT90 neg. (black) pos. (red)	Battery
4	Blue	Road Legal switch	To each other
5	Red/black/yellow/green/blue	Hall sensor	Motor
6	Red/black/green (or white)	Throttle	Throttle
7	Red/white/black (or brown)	PAS	PAS sensor
8	Red/blue/black/green/yellow	Display	SW900 LCD
9	Red/black	LED light	LED light

NOTE

• This controller requires a 48V to 72V battery (Lithium-ion recommended) with a minimum continuous output of 60 (or select 80) amperage. Please check your battery and battery BMS specifications for suitability.
• The controller can be swapped between the full 3000W/5000W or 250W power mode by connecting the single blue wire(s) together. Please check your local guidelines and keep the road legal switch (blue wires) connected on public roads.
• Please feel free to contact us before purchasing this controller to check the compatibility to your electric bike if unsure.